Dredge Full Armored Floating Hoses for Port and estuary maintenance 2021


Dredging projects are often classified into three categories: capital, that is, for new infrastructure, maintenance, or remedial (environmental) projects.

Ports and estuaries are under constant threat of siltation. Tidal movements deposit sand and silt from the sea in port basins and waterways. Rivers also carry sediment in their flows, which tends to settle in deltas. Due to these natural phenomena, the water depth gradually decreases. In order to safeguard a constant navigable depth, maintenance dredging is required.

Dredge Full Armored Floating Hoses for Port and estuary maintenance 2021
Port and estuary maintenance dredging floating hoses by HOHN Group

HOHN group own-patented self floating hoses is made of high quality and wear-resistant rubber, the outer cover has excellent abrasion resistance and UV protection.
The outside of the tube is wrapped with buoyancy material and covered with a protective layer.
HOHN floating dredging hoses are widely used with dredgers for silt or gravels conveyance.

Dredge Full Armored Floating Hoses for Port and estuary maintenance 2021
Floating Dredging Hoses

Floating hoses configurations can contain:

Floating discharge hoses; Pressure hoses; Tapered hoses; Connection hose; Riser hoses; Sinker hoses and Bow floater.

Possible floating dredge pipelines for Trailing Suction Hopper Dredger and Cutter Suction Dredgers please check below(Also applies to the Full armored rubber floating hoses dredge line )

Dredge Full Armored Floating Hoses for Port and estuary maintenance 2021
Floating hoses dredge line configurations

HOHN GROUP Full armored rubber floating hoses advantage introduction:

HOHN Group Inner full armored rubber hoses for dredging: It is composed of metal cone pipe, rubber layers, steel wire, rubber outer coating and flanges. The structure type is that multiple cone pipes are nested in sequence. After being combined with the rubber layer, Multi-strand steel wires are tied and fastened together, and finally covered with a rubber outer coating.

In dredging works, when conveying solid materials with sharp angles, ordinary rubber self-floating hoses are easily damaged inside.

For the steel ring armored floating hoses, as the rubber and steel rings is not synchronized, it result in grooves.

HOHN Group Full armoured rubber floating hoses are equipped with wear-resisting metal cone sleeves through the rubber hoses, so the solid dredging sediments (like Coral reef, medium coarse sand, heavy stone etc) and rubber hoses do not contact and wear synchronously, so as to achieve the effects of wear-resisting, bending cushioning and wind wave resistance. It can bend more than 30 degrees. In the working conditions (Midium containing sand less than 30%) the buoyancy is above 25% of the hose outer diameter.

Flanges could be customized according to your requirements.

HOHN GROUP Full armored rubber floating hoses Specifications:

ID mmPCD mmHole
Hole IDLength mm

HOHN GROUP Full armored rubber floating hoses Specifications

HOHN Group full armored floating hoses makes the inner wall of rubber hose not exposed, and partial grooves after wearing wont happen.

Existing problems for steel ring armored floating hoses:

1 steel ring off as the boding strength is not enough between the ring and rubber

2 Resulting grooves

3 Deformation and blockage of the ring

Our Full Armoured Hoses Series produts are exclusively produced in the world and are incomparable with hoses products currently circulating in the dredging market, and have superior performance of Wear-resistant and durable.

It all depends on your dredging needs to choose common dredging floatinghoses or full armored floating hoses dredge line.

Welcome to visit HOHN Group official website for more details: www.floatinghosesllc.com

Quick and helpful reply within 24 hours

Tailored solutions provided for your project